Mortise Lock: Heavy Duty Door and Gate Deadbolt Lock – ML100

This Style Of Lock Requires A Large Grooved Pocket To Allow For The Tempered Steel Lock Mechanism To Fit Inside The Door Edge

The Face Mount Plates, And Bolt Slide Are Larger Than That Of A Simple Deadbolt

SKU: SKU-3156 Category:

Description

Mortise Lock: Heavy Duty Door and Gate Deadbolt Lock

Shown here is a heavy duty mortise lock. ArtFactory.com uses this special heavy duty mortise lock, that produced by one of the world's top lock manufacturers. These locks are specially produced for our extra thick solid wood doors. This style of lock requires a large grooved pocket to allow for the tempered steel lock mechanism to fit inside the door edge. Also the face mount plates and bolt slide is larger than that of a simple dead bolt. This mortise lock is built with the ability to fit doors that are 2" - 8" thick without special adapters or breech in strength. This tungsten steel, heavy duty heavy bolt lock allows for additional strength and security. This mortise lock along with this 3" thick solid long grain timber door edge is the best fortress entrance door security available. Additionally, this lock can be ordered with both sides keyed at no additional cost.

mortise lock

ArtFactory.com uses this special heavy duty mortise lock, that produced by one of the world's top lock manufacturers. These locks are specially produced for our extra thick solid wood doors.

All Door Hardware Comes Fully Installed

When you order custom doors and gates from ArtFactory.com everything comes fully installed and finished when you order your designer gate or door pre-hung with hardware. All working door hardware is patina color matched to your decorative hardware.

Beware Of Fast Process Manufacturers

Most semi custom or fast process door manufacturers design with two primary things in mind: 1) Cutting their cost, and 2) How well each piece will fit in the shipping box so you or your builder can assemble your new door on site. In order to cut cost, they choose door thickness that are known in this industry as "production standard."

These door thickness are mostly under 2 1/4" thick, and rarely solid structural timber. Most are veneers, with so called engineered cores. This practice is again predicated on cost, not your security or the door's longevity. This is usually done so a cheap production lock from your local super lumber depot can be used. This has proven to never the best for you and your family's home security.

Only The Highest Quality Door Hardware

This door hardware should not be confused with ordinary hardware, normally found on most production or semi-custom doors. The hardware provided by ArtFactory.com has been specifically chosen to accommodate our ultimate custom doors and gates. To contact us with any questions about hardware for your custom door or gate, call1-800-292-0008. Our combination of top grade materials, and fine master craftsmanship allow for us to offer a quality of product that is unmatched anywhere, at any price. Never settle for the rest, when you can have the best, only at ArtFactory.com.

Mortise Lock Info

  • American hand made solid iron door hardware
  • Hand applied with heat and iron oxide patina finish on all wrought iron products
  • Solid hand forged metalwork hardware - no hollow iron or fake castings
  • Available in any metals types, stain and patina finishes
  • Built in the original craft - not reproduction
  • Order any size or style hardware custom designed for your residential or commercial space
  • Request original art or limited edition custom designed hardware
  • All custom hardware for doors are guaranteed forever - backed by over a century of fine craftsmanship

Blacksmithing is not casting (also known as drop forging or hollow cold roll) or other fast, fake processes. Our fine art custom door pulls are created from labor intensive tried and tested techniques. Each custom pull is fired by coal and anvil hammered into shape by the hands of our master blacksmiths in our American factory in Scottsdale, Arizona, USA. All of our custom door handles are made from solid hand forged wrought iron with a natural patina (we never use faux paint or powder coating). Our custom door hardware will arrive to you virtually maintenance free.

Available in any size, style, and finish, our custom door pulls can be custom fabricated in any design you can dream up. Order from our online catalog of custom door hardware, send in your own drawings or photos, or speak with one of our talented design engineers to get started. We at ArtFactory.com will hand make one-of-a-kind custom door handles just for you.

ArtFactory.com, an American manufacturer of custom door hinges, door straps, wood doors, iron gates, and designer furniture based in Scottsdale, Arizona, and Designs by H.J. Nick, have been designing and building some of the world's finest furnishings, all hand crafted in America, since 1913. Most of our clients want a furnishing that has a big WOW factor and timeless elegance. They all want investment value furnishings that make a proper statement reflecting their personality, or the personality of the environment for which the designer custom furnishings are intended. Our master level craftsmanship ensures your custom wrought iron gates and furnishings will stand the test of time, and are guaranteed forever, backed by over a century of fine craftsmanship.

Reviews

There are no reviews yet.

Be the first to review “Mortise Lock: Heavy Duty Door and Gate Deadbolt Lock – ML100”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.